Bio-Pharma Industrial Clean Room Solutions----------Sampling Booth


EXTERNAL DIMENSIONS Max (WXDXH):2000 X 2000 X 2350   MM      


Dispensing Booth / Sampling Booth designed to provide Class 100 working environment at rest with built in scavenging system to ensure Product, operator as well as surrounding environment Protection.


Except Filters and motor-blower assemblies which will be in standard execution.


Ø   Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3 μ at supply position.

Ø   Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3 μ at exhaust position.

Ø   Prefilter which conforms to EU 4 Grade, with efficiency of 90% down to 10 micron These Filters are basically made from micro-Fibre-glass media and are inherently washable.

Ø   Intermediate filter which conforms to EU 7 Grade, with efficiency of 95% down to 3 micron. These Filters are basically made from micro-Fibre-glass media and are inherently washable.

Ø   Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of airflow requirement for entire life of HEPA. Blower is high performance, noise abated, light weighted statically and dynamically balanced.

Ø   SS 304 Double Walled Side Panels.

Ø   Dwyer Make Magnehelic Differential Pressure Gauge (0 – 25 mm: 2 Nos.) to monitor pressure drop across intermediate filter & HEPA filter and (0-10mm: 1No.)  To monitor pressure drop across PRE Filter with respect to ambient

Ø   Electrical control panel mounted on the side panel of the unit.

Ø   Fluorescent Light (250 Lux)

Ø   ON/OFF Switches for motor & lights

Ø   5/15 Amp single-phase switch socket for external equipment.

Ø   DOP Test port at upstream of HEPA filter


Ø   Air cleanliness         :          ISO Class 5  (ISO 14644-1:1999 (E)

Ø   Air Velocities           :         0.45 ± 0.05 mps

Ø   Air Flow                   :          Vertical - Recirculatory

Ø   Noise Level              :     Less than 67 dB on Scale ‘A’ when Ambient is not greater than 55
                                                                           dB on Scale ‘A’

Ø   Vibration Level        :      Minimum

POWER SUPPLY  :    230 V AC   1-Ø 50HZ


GMP Clean Room and GMP Standards

GMP Clean Room and GMP Standards

GMP Introduction

GMP is the abbreviation of Good Manufacture Practice, is the reasonableness of the production process, the applicability of the production equipment, accuracy and normative of the production operations made ​​mandatory requirements. The latest edition of " Good Manufacturing Practice ( revised 2010 ) ‘’ was October 19, 2010 defined by the Health Ministry for consideration by hereby release , since March 1, 2011 came into effect.
GMP is the basic criteria for pharmaceutical production and quality management, is the key processes affected product quality in production of pharmaceutical preparations entire process and the manufacture of APIs. Vigorously promote drug GMP, in order to avoid possible contamination of pharmaceutical production processes and cross-contamination to reduce all kinds of errors occur, is an important measure to improve the quality of medicines .
At present, drugs produced in China sales in worldwide required manufacturers not only to comply with the of China 's version of 2010 GMP norms, but also in line with international EU / GMP standards, FDA-c GMP requirements.
GMP did not list the biological clean room design, construction, testing and other requirements. The details should refer to the relevant GMP implementation guide, drug GMP certification examination assessment standards, FED209E, ISO14644, ISO14698, IEST, international GB / T, EN1822 standards
Clean room and contamination control technology is one of the main means to ensure that GMP successful implementation.

Biological Clean Room Standards

Air Clean Class Level
Bio- clean room air clean area is divided into four areas:
Class A - high-risk operation area, which directly affects the operation area. Like sterilization tunnel oven, aseptic filling, bottle opening, autoclave cooling zones required 100 clean class laminar flow. Direct impact on the quality of products, called Class A.
Class B - indirect effects of the sterile operating area directly surrounding the class A area, like aseptic filling room, autoclave cooling room.
Class C and D - into the transition clean zone of the sterile production area. Preparation Room, changing rooms and a buffer room.

GMP RSP Grading in Different Standards Roughly Contrast

Prepared By: Vanessa Wang from Web:


What is the difference between clean booth and modular clean room?

What is the difference between clean booth and modular clean room?

1. Clean booth
Clean booth, also known as clean shed / softwall clean room / ISO5 laminar flow clean booth /1000class ISO6 clean booth/ 10,000 modular clean room, transparent plastic sheeting to prevent static electricity in the chaotic stream of clean room space surrounded by a small space, using HEPA or ULPA and independence of air conditioning units and become a more senior of the clean room, the level of 100 to 10,000 , the interior space of about 2.0 meters in height, covering an area of ​​about 50m2 or less, four pillars can be installed wheels, for flexibility in the use, supporting Air shower use.

2. Clean booth material :
Framework clean booth generally three types: stainless steel square pass, iron square pass, aluminum.
Clean the top shelf material generally three types: stainless steel, cold rolled steel spray , anti -static power grid around the curtain , (anti-static ) acrylic sheet .
Clean air section , the general choice FFU laminar flow hood (FFU laminar flow air supply unit )
Clean booth envelope materials generally include : anti-static curtain around , (anti-static ) acrylic sheet.

3. clean booth purification level selection:
More customers will choose one thousand clean booth , or ten thousand clean booth , a small number of customers will choose one hundred or ten thousand . In short, clean booth -level choices that customers need cleanliness may be, but relatively clean booth closed , such as when selecting clean booth level is relatively low , they tend to bring some side effects : insufficient cooling capacity , will shed staff in a clean I feel more hot, so the actual and the customer communication process , you need to pay attention to this point.

4. The cost of the clean and dust-free workshop shed comparison:
Generally speaking , most customers will clean booth built in the clean room , but some customers do not want to build a separate clean room, clean booth in the air conditioning system and does not consider air shower , pass the case of window cleaning equipment , etc. cost clean booth is about 40% to 60% clean room cost , depending on the customer 's choice of clean booth material , as well as the size of the clean booth . The greater the need to clean the area , the cost of clean and dust-free workshop shed will be smaller compared to the difference.

5. clean booth advantages:
A. Construction of fast, easy installation
B. low cost , easy maintenance
C. easy to control , FFU each comes with fan;

6. clean booth drawbacks:
A. because of the extensive use of FFU fan filter unit , so clean booth noise may be relatively large ;
B. FFU comes with fan , fan and more, to maintain high frequencies ;
C. due to reasons of space air , clean shed will often feel hot ;


Biological Safety Cabinet Specifications of Anlaitech Brand is On sales! Now!!

Biological Safety Cabinet Specifications of Anlaitech Brand

On sales!! Cost only 4876USD PER UNIT EX FACTORY

Model:  BSC-1500II-B2-X
Working area: 1300*600*660mm(W*D*H)
External size: 1500*850*2200mm(W*D*H)
Material: epoxy powder coated cold rolled steel for body
work zone made of 304 stainless steel
Safety height:</=200mm
Max opening: 400mm
Inflow velocity: 0.53m/s
Down flow velocity: 0.33m/s
Filter: 2set HEPA filter (99.999%@0.3um)
Front window: two layer toughened glasses (T=5mm)
UV lamp: 30W*1
Fluorescent lamp: 28W*1
Water and Gas tap: 1pc of each
Waterproof socket: 2pc
VFD display, microprocessor control system
Airflow:100% air exhaust
Cast wheel: directional wheels
Power: 1500W, 220V 50hz, 1phase

Welcome to us for details...
Order more save more!!
Sales Consultant, Vanessa ( email:

Matched Medical Standard ISO


We also not expect such a short period of time to complete 6sets Air Shower Clean room

We also not expect such a short period of time to complete 11sets Air Shower Clean room
Customer of AIMTR Electronics(
EMS industry) orders 11sets Air Shower room from us, delivery time beat our limited , fixed term must be used these air shower for their EMS industry clean room area, and only 24 hours downtime per month, but give a slightly shock to our manage Mr Liu who charged clean room equipment producing section, but order is signed, we shall try our best to do so.
Leave our sourcing and production times are only seven days time, and the quality is also very demanding, how to do it ? Procurement, is expected to open, spraying, grinding, assembly , quality control, packaging, logistics after a brief meeting, the rapid division of labor, work instantly .

Unexpected things tend to happen miraculously, orders 25th of Sept. smooth delivery than expected for almost a full day ahead of time to the customer. Afterwards, we Section Chief Liu and his colleagues are still surprised: " We did not expect such a short period of time to complete all set air shower rooms ," perhaps anxious customer anxious mentality appeal to every one of my colleagues , and it can not play out of our own imagine the energy to.

Prepared by:Corporate Communications Department of Anlaitech


Clean Room Automation Concept

Currently, injection drug Association (PDA) as the representative to agencies are actively promoting clean room and laboratory automation environments, thus completely eliminating the need for manual operation, the experiment paperless monitoring. In the clean room, a clear recommendation on the sampling point as quickly as possible to complete the automation of the collection . The following is a PDA- EM manual recommends :

"…by clean room touch pad and computer is automatically sent the terminal data to the clean room ."
" The program involves the need for manual data collection , data must be collected through a portable product to download data directly to a computer system in order to achieve the direct transmission of data , there is no risk of contamination ."

In the laboratory , the report also advocates automation , the following is recommended that EM manual :

"Analysis environmental data and Development Trend is the core to descript the process stability and evaluation of the overall control performance ."
EM report must be "…accurate , traceable , timely and have a good file backup file .”

Scanning below, follow us for the latest industry trends about clean room

Skype: wangvanlu
Tel: 0086-13826021570


We are dedicated on clean room Ffu(fan filter HEPA unit), because we have a brave heart!

We are dedicated on clean room Ffus(fan filter HEPA unit), because we have a brave heart!

We dedicated our firm. On FFU products, we have been focused on product appearance, structure and constantly adjust continuously optimized. We have developed for the different needs of customers of different types of products, ultra-thin, DC, 1175X1175mm large size , large amount of wind and so on.

The appearance of our FFUs is easy to use degrees , we also continued to improve : Improved multi-angle rotary knob, the vortex outlet, convex Laminating nameplate ...... faster to promote the upgrading of products, only for a better experience for our customers . All perseverance because we have a brave heart.

The same power of fans, wind speed, airflow, heat, durability , the failure rate to teach the same brand, the advantages are obvious. More than 2000 customers, 10 years of quality proof " 0 fault" "0 Maintenance " Brave heart also from the strength, the strength of the cast of "Anlaitech" brand Clean room FFUs.


New Industry Benchmark - Width 1300mm non- stitching Mini-pleated HEPA filter

New Industry Benchmark - Width 1300mm non- stitching Mini-pleated HEPA filter

This is Anlaitech for everyone to bring a new industry benchmark for mini-pleated HEPA filter: Width 1300mm non- stitching Mini-pleated HEPA filter, Air filter manufacturers have done a lot of this mini-pleated type HEPA filter, but concentrate on each product and take it to extreme level, it is Anlaitech Company aim to and also with such strength.

In order to improve the technological level of mini-pleated HEPA filter, width reaches 1300mm, the company spent heavily to introduce imported equipment, the level of product quality and technology to a new height, which is a new benchmark for the domestic industry.

Before type: stitching type Mini-pleated HEPA filter

Now with the 1300mm Width HEPA filter Producing machine: non- stitching Mini-pleated HEPA filter

Innovation never stop, Anlaitech keeps running to providing customers with the highest quality products......


Modular cleanroom FFU and HEPA filter Box of Anlai Brand, We like

Modular cleanroom FFU and HEPA filter box of Anlai Brand, We like!

When we Anlai company's products Modular cleanroom FFU and HEPA filter box  to customers in Russia 's hands, rave reviews and great appreciation for the Road " well, we like," This is probably the most direct affirmation from outside customers.

Ever know, can make such a high standard of products, we can invest no less, no less effort is needed, in recent years, we continue to introduce high-tech equipment to improve the accuracy of products, improve product processing technology, only to that of 0.1mm product error, we absolutely are disposed to re-do.

For the most overlooked product packaging and loading problems , we are also in accordance with the procedures and standards to control every detail , to be sure. Every step we have maintained a cautious attitude, to make the product safe , we more of a rigorous , customer less a concern , customers are more praise .
Modular cleanroom FFU and HEPA filter box of Anlai brand,we guarantee in high quality.


Feel this beautiful of Anlai Cleanroom Air Shower, Pass Box, Clean Bench, FFU, HEPA filter Box Producing plant

Cleanroom Air Shower, Pass Box, Clean Bench, FFU, HEPA filter Box is under producing now!
Employees working in the workshop seriously and neatly placed the product , forming a beautiful landscape of Anlai Cleanroom Equipment producing workshop. When you pass by our workshop,just slow down your pace, feel this way beautiful landscape to bring you pleasure.

HEPA filter box

HEPA filter box cabinet after painted


HEPA filter

HEPA filter

Anlai is a professional cleanroom  Air Shower, Pass Box, Clean Bench, FFU, HEPA filter Box manufacturing, we have great price advantages and quality control system.
Welcome all to contact with us.
Skype: wangvanlu


Clean room Clean Class Level Definition

Clean room clean class level definition: clean room clean class level of their main point unidirectional flow, non- unidirectional flow two ways.

Unidirectional flow (1-100 class):
1- 100 class clean room, organizations are using the one-way flow of air supply, clean indoor air that same section at any point, airflow direction and speed are consistent, This allows clean room air like “piston ", as indoor dust particles fastest away. To achieve the “piston " effect, HEPA filter needs full covered of room ceiling can be achieved only charge a one-way direction of airflow.

Non- unidirectional airflow (1000-100.000 class) clean room:
1000- 100.000 class airflow direction is different with above 100class clean room, indoor air is uneven parallel flow velocity was not accompanied by reflow or vortex , which mainly depends on the continuous flow of clean indoor air dilution , will gradually discharge DC high voltage generator indoor pollution , to achieve purification . achieve different purification level, mainly by the amount of air per unit time to the performance of the different.



   CUSTOMER QUESTIONNAIRE-For Best Service                                  
AL Sincerely Customer:
Many thanks for your bought or consult about our products,hope our service satisfied you.We look forward to your valuable comments and suggestions to further improve and enhance the quality of our products and service work.Thanks for your time:
Customer Information:
Your Name
  Job Title
Company Name
Company Types
Authorities Distributor
Trader Project Contractor
Contact Email
Company Address
Company Telephone
  Company Fax
Company Website
Air ShowerLaminar flow Clean BenchHEPA filterAL WEB( IntroduceAL Sales LetterPass BoxExhibition
How Do You Know AL
Products Bought/Consult
Fan Filter Unit Modular Clean Room Pocket FilterCompact FilterOther
Have you ever know or  purchased this kindly products from other company:
             what brand:
Your Comments for AL:
Products Quality
ExcellentSo so,but OKBadVery Bad
ExcellentSo so,but OKBadVery Bad
ExcellentSo so,but OKBadVery Bad
Sales Professional Degree
ExcellentSo so,but OKBadVery Bad
Service Attitude
ExcellentSo so,but OKBad
Friends Introduce

ExhibitionVery Bad
Will you still support AL
Yes, No
Your Comments For Us:  
Do you recently demands for air purification products
  Your Servier: Vanessa(